SAMCOM FWCN30A - Scan

Press+or-keytotoggleRogerBeepOnorOff.
PressPTTtoconfirmandquitorpressMENUtocontinuenextfunctionsetting.
16SCAN
BeforeyoustartscanningpleasepresettheCTCSScodeto"00"first.Note: if the CTCSS setting is
01 to 38. it can not scan other channel with different CTCSS code.
Pressandhold+or-keyforatleast3secondstostartscanningfunction.
LCDdisplayshowthescanningMainchannelonebyone.
itwillstopatthosemainchannelwithsignalforawhile.Andthencontinuescanning
Orifyouwanttousethischannel,pressPTTtoconfirmandyourradiowillchangetothischannel.
Note:Pleaseawarethatyoucanlistentootherradioon.thismainchannel.Ifyouwanttotalktoother
radios.PleasemakesureyourradiohavethesameCTCSScodewiththeothers.
FCCCOMPLIANCYDECLARATION
ThecompanySancondeclarationthatthedeviceFWAN1Acomplieswillalltherequirementsspecifiedinthe