SAMCOM FWCN30A - General Operations; Install; Removing Belt Clip; Safety Precautions

GENERAL OPERATIONS
Install / Removing Belt Clip
Installing Belt Clip
●
SlidetheBeltclipintotheslot
A“click”indicatestheBeltClipislockedintoposition.
Removing Belt Clip
●
Pullthebeltcliplatchforward
●
Whilepullingthebeltcliplatch,pushupthebeltclip
BatteryonFirstUse
Sincebatteriesleavefactorywithoutafullycharging,pleasechargethenewbatteriesbeforeusing.Undernormal
circumstances,the
batteryonfirstuseneeds5hoursofcharging.Thefirstthreetimesoffullycharginganddischargingprovidesbatteriesthebest
capacity.
Whenyoufindoutthebatteryislow,itisrequiredtochargeorreplaceit.
Safety Precautions
1.Donotdisposethebatteriesinthefire.
2.Donotdisposethebatteriesashouseholdwastes,anditmustbecollectedandtreatedproperly.
3.Donotripofftheshellfromthebatterywithoutpermission.