SAMCOM FWCN30A - Settings and Functions; Select Channel; CTCSS;Code Function; Group Channel Setting

cansetthechannelstolowTXpoweroptiontoconservetheenergyoftheradio'sbattery.
●
WhenLCDshowsthemainscreen,pressandholdthekeyfor3secondstochangetheTXpoweroption
betweenHighandLow.
WhentheradioissettoHighTXpower,theLCDdisplaystheicon .WhentheradioissettoLowTXpower,
theLCDdisplaystheicon
Note:thechannels8to14haveandonlyhavelowTXpoweroption,asperFCCregualtions.
14. Flashlight FUNCTION
Tousetheflashlightfunction
●
Whentheflashlightisnotillumining,presstheFlashlightkeyoncetoturnandkeepiton.
●
Whentheflashlightisillumining,presstheFlashlightkeytoturnitoff.
Menu Operation
PressMenukeyoncetofirstlyentermainchannelselectionfromthemainscreen,pressagainfornextfunctionselectionetc.
Themenuoperationflowchartisasfollows.
Main Screen → Main Channel → CTCSS/CDCSS → GROUP (Dual-Channel Watch) → VOX → Call Tone →
Key Beep → Roger Beep → Main Screen

9. SELECT CHANNEL
Toselectthemainchannel
●
Pressthe
MENU
keyonce,Mainchannelnumberwillflash.
●
Press
or toselectnewMainchannel
●
Pressthe
GROUP/OK
or
PTT
keytoconfirmandrevertbacktothemainscreen,orthe
MENU
keytoconfirm
andcontinuenextfunctionsetting.
Youhave10secondstodecidebeforeauto-revertingbacktothemainscreen
10. CTCSS/CODE FUNCTION
Thisfunctioncanhelpyouselectyourgroup(121CTCSS/CDCSScodes)ofusersonthesamechannel.
OnlytheuserswiththesameCTCSS/CDCSScodecanlistenandtalktoeachother.Pleasenotethatselecting
aCTCSS/CDCSScodedoesnotassuretotalprivacy.
●
Pressthe
MENU key twice, CTCSS/CDCSS code will flash.
●
Press
or toselectnewCTCSSorCDCSScode
●PresstheGROUP/OKorPTTkeytoconfirmandrevertbacktothemainscreen,ortheMENUkeytoconfirm
andcontinuenextfunctionsetting.
11. GROUP CHANNEL SETTING
Bydefault,allradioshaveadefaultGROUPnumberchannelsettingof“8”.Thisisthechannelthatallradios
willreceiveonwhensomeoneinyourgrouppressesthe“Group”buttontosendamessagetoeveryone.