SECTION V MAINTENANCE
Four wheel drive tractor front drive axle
1 - Hub oil drain screw plug
2 - Steering angle adjusters.
Warning: Whenever you change the tyres or adjust the track, make sure that there
is no interference between the tyres and the engine hood with the front axle fully in-
clined and fully steered. If necessary, adjust the steering angle adjusters accord-
ingly.
146
CAUTION: ALL IMPLEMENTS MOUNTED TO THE TRACTOR MUST
BE SAFELY ATTACHED.
WARNING: THE IMPLEMENTS MUST ALWAYS BE LOWERED TO
THE GROUND WHENEVER THE TRACTOR IS NOT OPERATING OR
WHEN ADJUSTMENT, MAINTENANCE OR REPAIR OPERATIONS
ARE TO BE CARRIED OUT.
DANGER: BEFORE DOING ANY JOB ON THE P.T.O. DRIVE LINE AND
P.T.O. END SHAFT, ENSURE THAT PTO IS DISENGAGED, THE
ENGINE SHUT OFF AND THE KEY REMOVED.
To Next Page
Loading...
Need help?
General
