Samson 3241 Series - 1.1 Notes on Possible Severe Personal Injury

1-4 EB 8015 EN
Safety instructions and measures
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions for the mounted actuator, e.g. uEB8310-X for
Type3271 or Type3277 Pneumatic Actuator
− Mounting and operating instructions for mounted valve accessories (positioner, solenoid
valve etc.)
− uAB0100 for tools, tightening torques and lubricant
− For oxygen service: Manual uH01
− Manual uH02: Appropriate Machinery Components for SAMSON Pneumatic Control
Valves with a Declaration of Conformity of Final Machinery
1.1 Notes on possible severe personal injury
DANGER
!
Risk of bursting in pressure equipment.
Valves and pipelines are pressure equipment. Impermissible pressure or improper
opening can lead to valve components bursting.
Î Observe the maximum permissible pressure for valve and plant.
Î Before starting any work on the control valve, depressurize all plant sections affect-
ed as well as the valve.
Î Drain the process medium from all the plant sections concerned as well as the
valve.