Samson 3241 Series User Manual

11-2 EB 8015 EN
Removal
11.1 Removing the valve from
the pipeline
a) Version with anges
1. Support the valve to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
2. Unbolt the ange joint.
3. Remove the valve from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
b) Version with welding ends
1. Support the valve to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport'
section).
2. Cut the pipeline in front of the weld
seam.
3. Remove the valve from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
11.2 Removing the actuator
from the valve
See associated actuator documentation.

Samson 3241 Series Specifications

General

Brand	Samson
Model	3241 Series
Category	Control Unit
Language	English