3-4 EB 8310-1 EN
Design and principle of operation
3.2.2 Actuator stem retracts
When the signal pressure is reduced or the
control signal fails, the springs move the ac-
tuator stem upward and open a mounted
globe valve. The valve closes when the signal
pressure is increased enough to overcome
the spring force.
3.3 Accessories
Switchover plate/connecting plate
Switchover plates and connecting plates are
listed as accessories.
With in-
dex
Order no.
Switchover
plate
New .01 1400-6822
Old .00 1400-6819
Connecting
plate
New .01 1400-6823
G thread .00 1400-6820
NPT thread .00 1400-6821
Actuators with device index .01 are
equipped with new connecting plates. Old
and new connecting plates are not inter-
changeable.
Note
A2.4
A2.5
A2.9
A2.4
A2.5
A2.6
A2.8
A2.4 Symbol
A2.5 Marking for signal pressure input
A2.6 With left attachment
A2.7 With right attachment
A2.8 Sealwithlter
A2.9 Signal pressure connection
Actuator stem extends
Left attach-
ment
Right attach-
ment
Actuator stem
Extends Retracts
Switchover plate Connecting plate
Actuator stem retracts
Left attach-
ment
Right attach-
ment
Fig.3-3: Switchover plate and connecting plate in Type3277-5