Samson 3277 - Ordering Spare Parts and Operating Supplies

9-12 EB 8310-6 EN
Service and conversion work
(A21) and bolts (A20). Observe tighten-
ing torques.
14. Unscrew the vent plug (A16) from the
bottom signal pressure connection and
screw it into the top connection (S).
The actuator springs, which now push
against the diaphragm plate from above,
cause the actuator stem to extend. The
signal pressure is connected to the bot-
tom connection (S) on the bottom dia-
phragm case. As a result, the actuator
stem retracts opposing the spring force
as the signal pressure increases.
15. Afx a new nameplate with changed
symbol and new conguration ID to the
actuator.
9.6 Ordering spare parts and
operating supplies
Contact your nearest SAMSON subsidiary
or SAMSON's After-sales Service for infor-
mation on spare parts, lubricants and tools.
Spare parts
See Annex for details on spare parts.
Lubricant
Details on suitable lubricants can be found in
the document uAB0100.
Tools
Details on suitable tools can be found in the
document uAB0100.