Samson 3510 - Page 16

16 EB 8091-1 EN
Design and principle of operation
Dimensions and weights
Dimensions (in inch and mm) and weights (in lbs and kg)
The lengths and heights in the dimensional drawings are shown on p.18.
Dimensions and weights for Type3271 and Type3277 Pneumatic Actuators with 120cm²
actuator area can found in the Data Sheet uT8310-1.
Table1: Dimensions for Type3510 Valve
Connection
Female
thread
Welding ends Flanges
G/NPT/
Rc
1
/
8
to ¾
NPS½ NPS1 NPS½ NPS¾ NPS1
L
1)
Class 150
in
2.91”
74mm
7.25 7.25 7.25 7.25 7.25
mm 184 184 184 184 184
Class 300
in 7.50 7.75 7.50 7.62 7.75
mm 190 197 190 194 197
Class 600
in 8.00 8.25 8.00 8.12 8.25
mm 203 210 203 206 210
Class900/
Class1500
in 8.50 10.00 8.50 9.00 10.00
mm 216 254 216 229 254
Class 2500
in 10.38 12.12 10.38 10.75 12.12
mm 264 308 264 273 308
L1
1)
Class 150
in
1.33”
34mm
3.62 3.62 3.62 3.62 3.62
mm 92 92 92 92 92
Class 300
in 3.75 3.88 3.75 3.81 3.88
mm 95 99 95 97 99
Class 600
in 4.00 4.12 4.00 4.06 4.12
mm 101 105 101 103 105
Class900/
Class1500
in 4.25 5.00 4.25 4.50 5.00
mm 108 127 108 114 127
Class 2500
in 5.19 6.06 5.19 5.38 6.06
mm 132 154 132 137 154
Note