EB 8384-2 EN 27
Design and principle of operation
Table8: Attachment of external position sensor (see section5.10)
Mounting parts/accessories Order no.
Template for mounting position sensor on older mounting parts 1060-0784
Direct attachment
Mountingpartsforactuatorwith120cm² 1400-7472
Connecting plate (9, old) with
Type3277-5xxxxxx.00Actuator
G
1
/
8
1400-6820
1
/
8
NPT 1400-6821
Connectingplate(new)withType3277-5xxxxxx.01 Actuator (new)
1)
1400-6823
Mountingpartsforactuatorswith175,240,350,355and750cm² 1400-7471
NAMUR
attachment
MountingpartsforattachmenttoNAMURribusingLorXLlever 1400-7468
Attachment to
Type3510Micro-
owValve
MountingpartsforType3271Actuatorwith60cm² 1400-7469
Attachment to
rotary actuators
VDI/VDE3845(September2010),seesection3.8fordetails.
Actuatorsurfacecorrespondstoxinglevel1
Size AA1 to AA4 with follower clamp and coupling wheel,
version with CrNiMo steel bracket 1400-7473
Size AA1 to AA4, heavy-duty version 1400-9384
Size AA5, heavy-duty version (e.g. Air Torque 10 000) 1400-9992
Bracketsurfacecorrespondstoxinglevel2,heavy-duty
version
1400-9974
SAMSONType3278with160cm²andVETECTypeS160andTypeR,heavy-du-
ty version
1400-9385
SAMSONType3278with320cm²andVETECTypeS320,heavy-dutyversion
1400-5891
and
1400-9974
Accessories for
positioner
Connecting plate (6)
G
¼
1400-7461
¼
NPT 1400-7462
Pressure gauge bracket (7)
G
¼
1400-7458
¼
NPT 1400-7459
Pressure gauge mounting kit up to max.
6bar(output/supply)
Stainlesssteel/brass 1402-0938
Stainlesssteel/stainlesssteel 1402-0939
Bracket to mount the positioner on a wall (Note: The other fastening parts are to
be provided at the site of installation as wall foundations vary from site to site).
0309-0184
1)
Only new connecting plates can be used with new actuators (Index 01). Old and new plates are not interchange-
able.