Samson 3730-3 - Preparation for Return Shipment

120 EB 8389 EN
Appendix
Code
No.
Parameter – Readings/
values [default setting]
Description
Codes with marked with an asterisk (*) must be enabled with Code3 prior to conguration.
t4 Target mode DI1 Trd Target operating mode
48* t5 Actual mode DI1 Trd Current operating mode
t6 Block error DI1 Trd Current block error
t7 Target mode DI2 Trd Target operating mode
t8 Actual mode DI2 TRD Current operating mode
t9 Block error DI1 Current block error
Resource Block
S0 Resource target mode Target operating mode
S1 Resource actual mode Current operating mode
S2 Resource block error Current block error
DI1 Function Block
I0 Target Mode DI1 Target operating mode
I1 Actual Mode DI1 Current operating mode
I2 Field_Val_D.Value
Discrete input variable and its status
I3 Field_Val_D.State
I4 OUT_D.Value
Discrete output variable and its status
I5 OUT_D.State
I6 Block error Current block error
DI2 Function Block
L0 Target mode DI1 Target operating mode
L1 Actual mode DI1 Current operating mode
L2 Field_Val_D.Value
Discrete input variable and its status
L3 Field_Val_D.State
L4 OUT_D.Value
Discrete output variable and its status
L5 OUT_D.State
L6 Block error Current block error