EB 8384-5 EN 41
Attachment to the control valve – Mounting parts and accessories
Table 2 · Direct attachment to Type 3277 Actuator (Fig. 5)
Order no.
Mounting
parts
Attachment to actuators with 240, 350, 355, 700 cm
2
1400-7453
Accessories
Required piping with screw fittings
– for "Actuator stem retracts"
– when the top diaphragm chamber is filled with air
240 cm
2
Steel 1400-6444
Stainless steel 1400-6445
350 cm
2
Steel 1400-6446
Stainless steel 1400-6447
700 cm
2
Steel 1400-6448
Stainless steel 1400-6449
Connection block with seals and screw
G
1
4
1400-8811
1
4
NPT 1400-8812
Pressure gauge mounting kit up to max. 6 bar (output and supply)
St. steel/brass 1400-6950
St. steel/st. steel 1400-6951
Table 3 · Attachment to NAMUR ribs or control valves with rod-type yokes
(20 to 35 mm rod diameter) according to IEC 60534-6 (Figs. 6 and 7)
Travel in mm Lever For actuators Order no.
7.5 S Type 3271-5 with 60/120 cm² on Type 3510 Valve (Fig. 7) 1400-7457
5 to 50 M
1)
Actuators from other manufacturers and Type 3271 with 120 to 700 cm² 1400-7454
14 to 100 L Actuators from other manufacturers and Type 3271, versions 1000 and
1400-60
1400-7455
40 to 200 XL
Actuators from other manufacturers and Type 3271, versions 1400-120 and
2800 cm² with 120 mm travel
1400-7456
30 or 60 L
Type 3271, versions 1400-120 and 2800 cm
2
with 30/60 mm travel 1400-7466
Mounting bracket for Emerson and Masoneilan linear actuators
In addition, a mounting kit acc. to IEC 60534-6 is required depending on the
travel. See row above.
1400-6771
Valtek Type 25/50 1400-9554
Accessories
Connecting plate (6)
G
1
4
1400-7461
1
4
NPT 1400-7462
Pressure gauge bracket (7)
G
1
4
1400-7458
1
4
NPT 1400-7459
Pressure gauge mounting kit up to max. 6 bar (output/supply)
St. steel/brass 1400-6950
St. steel/st. st. 1400-6951
1)
Lever M is mounted on basic device (included in the scope of delivery)
To Next Page
Loading...
