Samson Expedition XP106 - Quick Start - Stage XPD1 Wireless System

Quick
Start •
Stage
XPD1
Wireless
System
Plug the
RXDl
USB receiver into the
USB jack
labeled 2.4GHz
WIRELESS.
II
:;
.•
oor
e--0
•
•
Turn the
WIRELESS LEVEL
knob
on
the
XP106
completely
counterclockwise to 0, then turn the
POWER
siwtch
on
the XP106 to the
ON
position.
16
On
the
wireless handheld
transmitter,
unscrew the bottom section of
the microphone
by
turning
it
counterclockwise and then slide
it
off.
Place
a fresh set of
AA
(LR6) batteries
in the transmitter battery
holder,
taking care to observe the
polarity
markings, then
replace
the cover.
Turn
on
the power to the transmitter
by pressing and
holding Power switch;
the indicator
LED
will light amber.
SAMSIJN