Samson Expedition XP106 - Stage RXD1 Receiver Controls

Stage RXDl Receiver Controls
1. USB Connector- Plugs into the USB 2.4GHz Wireless jack on
the rear panel of the XP106. The receiver can also plug directly
into a computer
USB port and will be recognized as a USB
audio device. The unit passes audio to the device and receives
power from the device through this connector.
2. PAIR Switch- Press >5 seconds to enter pairing mode.
3. STATUS Indicator - This LED displays the operation mode:
Amber
Normal Operation
Flashing Amber
Pairing
No Light
Not Paired; Transmitter Out Of Range;
No Power
XP1 06 • Portable PA System
19