Up to four teletext pages can be stored.
1 Select the LIST mode.
Result: Four 3-digit numbers are displayed in different colors at
the bottom of the screen.
2 Press the colored button corresponding to the page that will be
replaced.
3 Enter the new page number using the numeric buttons.
4 Repeat steps 2 and 3 for each page to be stored, using a different
colored button each time.
5 Press the STORE ( ) button until the corresponding blocks are
displayed in white.
➣
The LIST ( ) button is used to switch between:
◆ LIST mode
◆ FLOF mode
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1 Display the teletext contents page by pressing the TTX/MIX ()
button.
2 Press the colored button corresponding to the topic that you wish to
select (The available topics are listed on the status information
line).
Result: The page is displayed with additional color-coded
information that can be selected in the same way.
3 To display the: Press the:
Previous page Red button.
Next page Green button.
4 When you have finished, press the TV button to return to the
normal broadcast.
Using FLOF to Select a Teletext Page
Storing Teletext Pages
To Next Page
Loading...
