Disassembly and Reassembly
3-84 Samsung Electronics
No Parts Procedure Remark
3) Release 2 screws and pull Bottom
Discharge Kit(
ⓖ
) out.
4) Disconect the Step Motor wire(
ⓗ
)
from the conect wire . This part is right
side of the Bottom Discharge Kit(
ⓖ
).
5) Pull Bottom Discharge Kit(
ⓖ
) Out
from the bottom of it.
6) Release 3 screws and pull the Evap out
from top to bottom direction.
ⓖ
ⓖ
ⓗ
To Next Page
Loading...
