Disassembly and Reassembly
Samsung Electronics 3-99
No Parts Procedure Remark
1 Cabi Front RH
You must turn off the Power before
disassembly.
1) Unscrew and remove two mounting
screw in the Cabinet Front RH.
(Use +Screw Driver)
2 Cabi Top 1) Unscrew and remove 9 screws on each
side of the Cabinet-Top.
(Use +Screw Driver)
3 Cabi Install
Front
1) Unscrew and remove 1 screw in the
Cabinet-Install Front.
(Use +Screw Driver)
4 Guard Cond 1) Pull the sensor from Guard Cond.
2) Unscrew and remove 4 screws in the
Guard Cond. (Use +Screw Driver)
■AC140RXAD*G
To Next Page
Loading...
