English 13
Controlling air flow direction
You can change the air flow direction by pressing the Temp and Fan
buttons.
• 'Standard’ was selected from Model Selection during initial
settings
In
operation
▶ Press
button ▶ Select Vertical or Fix.
or
In
operation
▶ Press
button ▶
Select Horizontal
or Fix.
• '360’ was selected from Model Selection during initial settings
In
operation
▶ Press
button ▶
Select Spot/Mid/
Wide/Swing.
NOTE
• To fix the airflow in the desired direction, press the button
once again when the airflow blades are at the intended position.
• Duct type indoor units do not have the up/down airflow direction
option.
• You can select an airflow direction by pressing the Options button.
– 'Standard’ was selected from Model Selection during Initial
Settings
In operation ▶
▶ ▶
Select Direction. ▶ ▶ ▶
Select Fix, Vertical, Horizontal, or All. ▶
– '360’ was selected from Model Selection during Initial
Settings
In operation ▶
▶ ▶
Select Direction. ▶ ▶ ▶
Select Spot, Mid, Wide or Swing. ▶
Vertical
To Next Page
Loading...
