English 29
AI Diagnostics function
Use the AI Diagnostics function to determine the state of the air
conditioner.
▶ ▶
Select
Settings.
▶
▶ ▶
Select
AI Diagnostics.
▶
NOTE
• This function can be turned on when ‘Standard’ was selected from
Model Selection during Initial Settings.
• After AI Diagnostics function is started, it takes approximately 7 to
13 minutes to complete diagnosis. While AI Diagnostics function is
running, Cool mode operates.
• If AI Diagnostics mode is running and you turn on a different
mode, AI Diagnostics mode turns off.
• If air conditioner inspection is required, inspection information can
be obtained through the status indicators on the indoor unit panel
or the Homecare service in the SmartThings app.
Diagnostics
To Next Page
Loading...
