English 24
Remote Control Operation
Controlling the air flow direction individually
Use the individual air flow direction control function to individually
control the air flow directions of the air outlets.
For 4-Way cassette air conditioners, set the positions for individual
blades to Vertical or All mode. For 360 cassette air conditioners, set
the positions for individual blades to Spot, Mid, Wide or Swing.
• 'Standard’ was selected from Model Selection during initial
settings
In Vertical
or All
operation
▶
▶ ▶
Select
Blades.
▶
▶ ▶
Select one
from
Blade 1 to
Blade 4.
▶
• '360’ was selected from Model Selection during initial settings
In Spot, Mid,
Wide, or Swing
operation
▶
▶ ▶
Select
Blades.
▶
▶ ▶
Select one
from
Blade 1 to
Blade 3.
▶
NOTE
• These settings can be configured when ‘Standard’ or ‘360’ was
selected from Model Selection during Initial Settings.
• These settings are available on 4-Way cassette air conditioners
and 360 cassette air conditioners.
• You can select individual blades for up to four different indoor
units.
Blades
To Next Page
Loading...
