English 21
Auto Clean function
Use the Auto Clean function to remove moisture from the inside of
the air conditioner for preventing propagation of fungi, bacteria, etc.
Press and hold for 3 or more seconds.
or
▶ ▶
Select
Auto Clean.
▶
NOTE
• Depending on the condition of the indoor unit, the Clean operation
stops after running for 30 seconds to 20 minutes.
• After this function is turned on, the WindFree Cooling function
operates for 3 minutes, and then the airflow blades open, and the
Auto Clean function operates for an appropriate time depending
on how dry the inside of the indoor unit is.
• When the Auto Clean function is set, the Timer LED on the indoor
unit blinks 3 times for 3 seconds (OFF → ON → OFF → ON → OFF →
ON → OFF → returns to the previous state). When the Auto Clean
function is cancelled, the Timer LED on the indoor unit blinks once
for 1 second (OFF → ON → OFF → returns to the previous state).
• If you turn on the air conditioner and then turn it off within 20
seconds, the Auto Clean function does not operate.
• When the air conditioner is turned off, the Auto Clean function
operates immediately. When it is turned on, the Auto Clean
function operates after it is stopped.
• Once the Auto Clean function is started, it automatically continues
to operate until it is cancelled.
To Next Page
Loading...
