English 5
Installing the remote control holder
1
Choose a location on the wall where to install the
remote control holder.
2
Mark the two spots for fastening the two M4 x 16 mm
screws. Then drill the two holes.
3
Attach the remote control holder to the wall-mount
pad by sliding it down from the top of the pad until a
‘click’ sounds.
NOTE
• Installation location requirements:
– Avoid locations exposed to direct sunlight.
– Avoid locations where the holder is covered by objects such as curtains.
– Choose a location that is at least 1 m away from a TV or stereo system.
To Next Page
Loading...
