Samsung AR-CH01U - Controlling the Indoor Units Individually

English 25
Controlling the indoor units individually
Use the Zone function to assign numbers to multiple indoor units
installed in the same space, and control individual indoor units.
▶ ▶ Select Zones. ▶
▶ ▶
Select the desired
indoor unit.
▶
NOTE
• You can select either one or all of Zone 1 to Zone 4.
• If multiple air conditioners are in use, you can pair each indoor unit
and remote control, and control indoor units individually.
• Setting a channel to individually control air conditioners
Configure this setting using the remote control when the indoor
unit power is off.
▶ ▶ Select Zones. ▶
▶ ▶
Select one
from Zone 1
to Zone 4.
▶
▶
(5-second)
– Press the button, and within 60 seconds, press the
button.
• The current Zone function settings persist even if you change the
current mode or you turn off and then turn on the remote control.
If the remote control battery discharges, all settings are reset, in
which case settings should be configured again.
Zones