English 14
Remote Control Operation
WindFree Cooling function
Use the WindFree Cooling function to enjoy a mild breeze coming
through fine holes in the WindFree panel instead of air coming
directly through the airflow blades.
In Cool, Dry, or Fan mode ▶
NOTE
• This feature can be turned on when ‘Standard’ was selected from
the Model Selection during Initial Settings.
• To cancel this function, press the button again.
• If the WindFree Cooling function is cancelled, the air conditioner
returns to the original fan speed.
• You can adjust the set temperature during the WindFree Cooling
function, and recommended set temperatures are 24 ℃ to 26 °C
(75 ℉ to 79 ℉).
However, you cannot change the set temperature in the Fan mode.
• You can use the WindFree Cooling function when the Cool, Dry, or
Fan mode is running.
• If the room temperature goes high because of rise of external
temperature, heat from cooking, or other reason, operate the
WindFree Cooling function after operating in the Cool mode.
• If you select the WindFree Cooling function in the Fan mode, the
compressor stops working so that cool air does not come out.
However, mild breeze comes out and starts to clean the air in the
room.
• During the WindFree Cooling operation, the cold air may be
intermittently weakened depending on the temperature and
humidity in the room.
But the WindFree air currents are maintained and the weakened
cold air is immediately recovered, consequently keeping the room
comfortable.
(During the WindFree Cooling operation, the air flow blades may
open to control the indoor air currents smoothly, depending
on the installation settings. In this case, as soon as the indoor
temperature and humidity change, the air flow blades are
closed and the WindFree Cooling operation restarts. For more
information on the installation settings, see “Setting the indoor
unit addresses and the installation options” in the installation
manual of the indoor unit.)
Cool
.0
18
To Next Page
Loading...
