English 19
Fan mode
Use Fan mode to run the air conditioner like a floor fan, providing a
breeze without heating or cooling.
▶ ▶
Select
Fan.
NOTE
• If the air conditioner will not be used for an extended period
of time, run it in Fan mode for 3 to 4 hours to dry the internal
components.
Heat mode
Use Heat mode to stay warm.
▶ ▶
Select
Heat.
NOTE
• While the air conditioner warms up, the fan may not operate for a
while at the beginning to prevent cold wind.
• If the outdoor temperature is low and the humidity is high while
the Heat mode is running, the heating performance of the air
conditioner may decrease due to frost and ice that formed on the
outdoor heat exchanger. When this condition happens, the air
conditioner runs the defrost function for about 5 to 12 minutes to
remove the frost and ice, and water steam is released from the
outdoor unit.
• While the defrost function is running, the indoor unit does not
blow out air, to prevent cold air from blowing. The air comes out
after defrost mode ends.
• The operation time of the defrost function varies depending on
the amount of the frost and ice and the humidity.
• While the defrost function is running, none of other functions will
work, even if you select them on the remote control.
Fan
Heat
.0
24
To Next Page
Loading...
