English 4
Preparation
Read before use
Preparation
Checking the package contents
Wireless remote control M4 x L16 mm screw Remote control holder
Wall-mount pad for remote
control holder
User manual
Charging the remote control
Charging port
Solar cell
• Fully charge the remote control before use.
• If “Low Battery” appears on the remote
control display, charge the remote
control by using the USB port (C-Type) at
the bottom of the remote control. If you
keep the remote control facing down, it
is charged via the solar cell, allowing the
battery to last longer.
• While the remote control is being charged,
‘Charging’ is displayed on the display. After
charging is complete, ‘Complete’ appears
and then the display turns off. Then,
remove the charging cable.
• Charge the device by using a USB power
adapter that supports power as high as
5 V and 2 A or more. If charging power is
low, the device may not charge properly
or the device may turn off.
• If the remote control will not be used for
an extended period of time, make sure to
charge the remote control by using the
USB port before storage.
• The product does not come with a remote
control charging cable or charger.
To Next Page
Loading...
