Samsung BD-D8200A - Wired Network

44 English
Setup
Wired Network
Setting Up a Wired Connection - Auto
Press the ▲▼ buttons to select Wired.
Press the ENTER button.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
Setting Up a Wired Connection - Manual
If you have a static IP address or the Auto Setting
does not work, you’ll need to set the Network
Settings values manually.
To view your Network Settings values on most
Windows computers, follow these steps:
Windows XP
Right click the Network icon on the bottom
right of the Windows desktop.
In the pop-up menu, click Status.
On the dialog that appears, click the Support
tab.
On the Support tab, click the Details button.
The Network settings are displayed.
Windows 7
Click the Network icon on the bottom right of
the Windows desktop.
In the pop-up menu, click Network and
Sharing Centre.
On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
On the Support tab, click the Details button.
The Network settings are displayed.

1.
2.

1.
2.
3.
4.
1.
2.
3.
4.
NOTE
Depending on your Windows version, the information
may differ.
To enter the Network settings into your product,
follow these steps:
Press the ▲▼ buttons to select Wired, and
then press the ENTER button.
Press the ◄► buttons to select IP Settings,
and then press the ENTER button.
On the Network Status screen, select Cancel,
and then press Enter.
Press the ENTER button to select IP Mode.
Press the ▲▼ buttons to select Manual, and
then press the ENTER button.
Press the ▼ button to go to the first entry field
(IP Address).
Use the number buttons on your remote to
enter numbers.
When done with each field, press the ►
button to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
Enter the IP Address, Subnet Mask, and
Gateway values.
Press the ▼ button to go to DNS Mode.
Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
Press the ENTER button to select OK.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
✎
▪
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Network Settings
> Move " Enter ' Return
Select a network connection type.
Wired
Wireless
(general)
WPS(PBC)
One Foot
Connection
Connect to the network using a LAN cable. Please make
sure that the LAN cable is connected.
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
IP Settings
> Move " Enter ' Return
IP Mode Manual
IP Address
0
.
0
.
0
.
0
Subnet Mask
0
.
0
.
0
.
0
Gateway
0
.
0
.
0
.
0
DNS Mode Manual
DNS Server
0
.
0
.
0
.
0
OK