Standby Mode Upgrade
You can set the Standby Mode Upgrade function
so that the player downloads new upgrade
software when it is in Standby mode.
In Standby mode, the player is off, but its Internet
connection is active. This allows the player to
download upgrade software automatically, when
you are not using it.
1. Press the ▲▼ buttons to select Standby
Mode Upgrade, and then press the
v
button.
2. Select On or Off.
If you select On, the player will automatically
download new upgrade software when it
is in Standby mode with the power off. If it
downloads new upgrade software, the player
will ask you if you want to install it when you
turn the player on.
| NOTE |
\
To use Standby Mode Upgrade function, your player must
be connected to the Internet.
English 33
|
02229K-BD-E6500-ZK-ENG.indd 33 2012-05-02 오후 6:03:15
To Next Page
Loading...
