3.2 CHAPTER THREE: TV OPERATION
OPERATION
4
Make sure that the antenna is
connected to the TV. And then
press VOL+ or VOL-.
The “Auto Porgram” is active.
Press MENU to skip.
(refer to “Auto program” on
page 3.6.)
5
Press VOL+ or VOL- to move to
the hour or minute. Set the
hour or minute by pressing the
CH▲ or CH▼.
(refer to “Setting the clock” on
page 3.10.)
6
When you have finished,
press MENU button.
The message “Enjoy your
watching” is displayed.
7
If you want to reset this feature
(1) Press MENU button.
(2) Press CH▼ three times to
select the Function menu
and press VOL+ .
(3) Press CH▼ to select the
Plug & Play and press VOL+.
The message “Plug & Play”
is displayed.
Note: Plug & Play feature doesn’t work in the A/V mode.
To Next Page