Samsung CLX-6220 - Error 03-007;008;009: Motor Error

Alignment & Troubleshooting
Service Manual
4-43
Samsung Electronics
● Code
03-007
03-008
03-009
● Error message
Motor error
Error: #03-007/008/009
Turn off then on
● Symptom
Motor Signal is abnormal.
● Possible Cause
1. Harness is defective, Connector is not connected properly.
2. Color OPC BLDC Motor is defective.
3. Main Board is defective.
● Troubleshooting method
1. Check the motor connector. Reconnect the harness.
2. If the problem persists, replace the BLDC motor.
3. If the problem persists after replacing BLDC motor, replace the Main PBA.
Fuser BLDC
OPC BLDC
DEVE BLDC
Fuser BLDC
OPC BLDC
DEVE BLDC