Samsung CLX-6220 - Scanner Door Open

Alignment & Troubleshooting
Service Manual
4-50
Samsung Electronics
● Code
08-008
● Error message
Scanner door Open
Door of scanner is open. Close it
● Symptom
DADF door is opened.
● Possible Cause
The cover open sensor is defective.
● Troubleshooting method
Check if the DADF cover is closed.
<door is opened> <door is closed>
If opened, close the DADF cover until it blocks the PHOTO-INTERRUPTER.
PHOTO-INTERRUPTER
If UI message is not changed, open the COVER-DADF REAR and replace the PHOTO-INTTERRUPTER.