Samsung CLX-9350ND - Scan Motor and Gear Belt

3. Replaceme
n
Perform the following procedure to remove the Scan m
o
1. Remove the Spring [A].
3.4.9 Scan motor and gear belt
1.
Remove
the
Spring
[A].
2. Remove 3 screws.
3. Release the gear belt from the gear. Remove the Sc
a
[A]
[C]
Perform the following procedure to remove the Home
S
1. Remove the scan glass(3.4.1) and rear cover(3.4.3).
2 Release the home sensor [A] by pushing sensor hing
3.4.10 Home sensor
2
.
Release
the
home
sensor
[A]
by
pushing
sensor
hing
[A]
Service Manual
CLX-9250/9350 series
3-
2
n
t Procedures
o
tor and Gear belt from the Scan Unit.
a
n Motor [C].
[B]
S
ensor from the Scan Unit.
ge from the rear
ge
from
the
rear
.
SAMSUNG ELECTRONICS
2
2