Samsung CLX-9350ND - Fuser Belt

3. Replaceme
n
3.5.9 Fuser Belt
Perform the following procedure to remove the Fuser
B
[A]
[B]
[B]
Service Manual
CLX-9250/9350 series
3-
4
n
t Procedures
1. Remove the Heat roller (Refer to 3.5.8)
2. Remove the Bracket rear
[
A
]
after removin
g
4
B
elt from the Fuser Unit.
[] g
screws.
3. Remove 2 baffle springs.
CAUTION
Be careful not to lose the springs. They are easily
released.
4. Remove the Bracket top assembly [B] after
removing 3 screws and 3 connectors.
SAMSUNG ELECTRONICS
4
1