Samsung CLX-9350ND - Face up Exit Lower

3. Replaceme
n
3.13.3.3 Face Up Exit Lower
1. Remove the side joint PBA cover [A] after
Perform the following procedure to remove the Face
U
removing 3 screws.
[A]
[A]
2. Remove 2 screws and the stopper [B].
[B]
Service Manual
CLX-9250/9350 series
3-1
n
t Procedures
U
p Exit Lower from the Cover-Side.
3. Remove 1 screw and the stopper [B].
[B]
4. Lift up the Face Up Exit Lower and unplug the
connector
connector
.
SAMSUNG ELECTRONICS
09