9. System
9. System Recovery
This Application allows administrator to recover the s
occurs This application will primarily be used by Devic
Also, you need a USB stick for HDD back up.
[Preparation]
NOTE - Use min 2GB USB stick or bigger for HDD
If you use less than 2GB USB stick you’ll get a mess
Memory stick file system type: FAT16 or FAT32 not
Memory stick must contain 3 files only: unix script f
auto_hdd_format.txt onerom_version.txt
fter successful HDD recovery you need to manually
option.
After reboot system should go to ‘System Initializ
It does not happen always.
If system will not go to initialization you must per
otherwise system will not work properly.
Please perform FW update using One ROM FW fil
a must to even all FW module levels includin
procedure.
Service Manual
CLX-9250/9350 series
9-
Recovery
stem to factory default state if a Hard Disk failure
ge ‚FAIL: Please replace the HDD.‘:
les x2, HDD image file x1
xxxx.ehd
eboot machine by selecting Shutdown or Reboot
orm ‘Full memory clear’ from SVC Mode
after completion of System Initialization. This is
n FW module restored durin