Samsung CLX-9350ND - Void Areas, White Spots

7. Trouble
s
A. T
yp
ical fault
y
ima
g
es
7.3.14 Void areas, white spots
yp y g
B. Troubleshooting procedure
Step Section Check item
1 Image check There are void areas at t
h
side or high density secti
o
2 There is void area at the
r
side section.
3 Imaging unit The surface of the OPC
d
scratched.
4 Dirty on the outside.
5 Toner cartridge Foreign matter or caked t
o
the toner cartridge.
6 Transfer belt
unit
Transfer belt is dirty or
scratched.
7 Transfer roller
unit
Transfer roller is dirty or
scratched.
8 Paper path There is foreign matter o
n
path.
9 Pre-image transfer guide
is damaged or dirt
Service Manual
CLX-9250/9350 series
7-1
is
damaged
or
dirt
y.
s
hooting
Result Action
h
e front Yes 1. Change paper to one just
o
n.
unwrapped from its package.
2. Print the image on recycled
paper mode.
r
ear Yes
d
rum is Yes Change imaging unit.
Yes Clean.
o
ner in Yes Remove foreign matter.
Yes Clean dirty belt with a soft
cloth. Change transfer belt
unit if belt is damaged.
Yes Change 2
nd
image transfer
roller unit.
n
paper Yes Remove foreign matter.
plate Yes Clean or change.
SAMSUNG ELECTRONICS
72