● Symptom / Cause :
Toner is over supplying in imaging unit.
● Troubleshooting method :
1. Install imaging unit again.
2. If the problem persists, replace the imaging unit.
● Replacement
K Imaging Unit : CLT-R607K
C Imaging Unit : CLT-R607C
M Imaging Unit : CLT-R607M
Y Imaging Unit : CLT-R670Y
DEVE CRUM JOINT : JC92-02163A
Service Manual
CLX-9250/9350 series
7-
hooting
re #C3-2313 : Install Yellow imaging unit again.
ilure #C3-3313 : Install Magenta imaging unit again.