chapter 5 Updating Firmware
chapter 6 Preventive maintenance (PM)
4.5.3.2 Scanner/DADF NVM Read/Write …………………… 4-27
4.5.3.3 Scanner/DADF Test Routines ……………………… 4-28
4.5.4 Adjustment ………………………………………………… 4-30
4.5.4.1 Print Adjustment ……………………………………… 4-30
4.5.4.2 Copy Adjustment ……………………………………… 4-32
4.5.4.3 Scan Area Adjustment ………………………………… 4-33
4.5.4.4 DADF Adjustment ……………………………………… 4-35
4.5.4.5 Finisher Adjustment …………………………………… 4-37
4.5.5 ACS(Auto Color Sensing) ………………………………… 4-40
4.5.6 Color Management ………………………………………… 4-41
4.5.6.1 Auto Color Registration ……………………………… 4-41
4.5.6.2 Full Color Registration ………………………………… 4-42
4.5.6.3 Auto Color Tone Adjustment ………………………… 4-43
4.6 Sevice functions ………………………………………………… 4-46
4.6.1 Main Memory Clear ………………………………………… 4-46
4.6.2 Hard Disk Maintenance …………………………………… 4-46
4.6.3 Debug Log …………………………………………………… 4-46
4.6.4 Port …………………………………………………………… 4-47
4.6.5 Capture Log ………………………………………………… 4-47
4.6.6 Toner Save ………………………………………………… 4-47
4.6.7 Count Setting of Large Page ……………………………… 4-47
4.6.8 TR Control Mode …………………………………………… 4-48
5.1 Updating from the Printer Control Panel ……………………… 5-2
5.2 Updating from the Network …………………………………… 5-8
6.1 PM Supplies ……………………………………………………… 6-1
6.2. PM Procedures ………………………………………………… 6-5
6.2.1 Toner cartridge ……………………………………………… 6-5
Contents
To Next Page
Loading...
