Removal and Reassembly _ 17
Part Figure Description
Drum Removal
1. Disconnect the power supply to the unit
2. Remove the Top Cover, the console, the Front
panel, the Plate(u), and the Front Bulkhead
3. Remove Belt
4. Remove the Drum
Sensor
(Thermistor,
Thermostat)
Removal
1. Disconnect the power supply to the unit
2. Remove the Top Cover, the console, and the Front
panel
3. Remove 2 Housing Sensor
4. Remove the Sensor Cover
5. Remove the Sensor
Do not apply excessive force to the terminal.
To Next Page