Installer reference guide / Mono tank integrated type 13
This chapter describes what needs to be done after the boxes with the outdoor and indoor unit are delivered on-site.
NOTE
• Directly after delivery, the unit must be checked for (transport) damage. Any damage must be reported
immediately to the applicable distributor of the Samsung products. After inspection, the protective
wrapping and box must be put back correctly in order to protect the product.
• It is important to protect the product, therefore transport the product in the protective packaging and
keep covered until final installation.
• Preparation of both horizontal and vertical transport (routes and equipment) might be required in order
to get the product in the correct installation location.
2.1 Outdoor unit
Unpacking the outdoor unit
To Next Page
Loading...
