Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when there is a Wi-Fi access point
available but you are not connected to it. May also
display if there is a communication issue with the
target Wireless Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to “Wi-Fi
Direct” on page 156.
Wi-Fi Advanced Settings
The Advanced Wi-Fi menu allows you to set up many of your
device’s advanced Wi-Fi services.
Settings
Connections
Wi-Fi
.
1. From the Home screen, tap
2. Press
Advanced
.
The following options are available:
• Network notification
: alerts you when a new WAP is available.
• Passpoint
: allows you to connect to passpoint-enabled Wi-Fi
Access Points automatically. Touch and slide the slider to the
right to turn it on
.
•Sort by
: allows you to sort by alphabet or RSSI.
• Keep Wi-Fi on during sleep
: allows you to specify when to
disconnect from Wi-Fi.
• Always allow scanning
: allows the Google location service
and other apps to scan for networks, even when Wi-Fi is turned
off.
• Auto network switch
: allows the device to automatically
switch between a Wi-Fi network or a cellular network.
• Auto connect
: allows you to be automatically connected to an
AT&T Wi-Fi Hotspot as soon as your phone detects it.
• Install certificates
: allows you to install security certificates
that you have on a MicroSD card.
•MAC address
: view your device’s MAC address, required
when connecting to some secured networks (not configurable).
•IP address
: view your device’s IP address.
155
To Next Page
Loading...
