135
8. Move the
Smart alarm
slider to the right to activate this
feature which slowly increases screen brightness and
the volume of nature tones to simulate dawn breaking.
Tap the field to assign a
INTERVAL
time (1 minute,
3 minutes, 5 minutes, 10 minutes, 15 minutes, or
30 minutes) and nature
TONE
(Angel’s Feather,
Beginning of Life, etc..).
•INTERVAL
category describes the length of time the alarm will
remain silent between alarm notifications (snooze time).
•TONE
category provides one of several nature sounds that are
used as the alarm tone.
9. Tap the
Name
field and enter a name for this Alarm.
10. Tap
Save
to store the new alarm event.
Turning Off an Alarm
To stop an alarm when it sounds, touch and slide
to any direction.
Setting the Snooze Feature
To activate the Snooze feature after an alarm sounds,
touch and slide to any direction. Snooze must
first be set in the alarm settings.
Deleting an Existing Alarm
1. From the Clock screen, touch and hold an on-screen
alarm event.
2. Tap
Delete
.
World Clock
This feature allows you to find out what time it is another part
of world.
1. From the Clock screen, tap the
World Clock
tab.
2. Tap
Add city
then scroll and select the desired
city, or tap in the search field to locate a city.
•
You can also press the GPS button to get a refined list based on
your current location.
To Next Page
Loading...
