EasyManua.ls Logo

Samsung HT-AS1 - Setting the Speaker Listening Distance

Samsung HT-AS1
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
GB
20
OPERATION
Set the distance from the speaker to listening position in intervals of 0.3m.
F.L (front left) : 0.3m ~ 9m
CEN (centre) : 0.3m ~ 9m
F.R (front right) : 0.3m ~ 9m
S.R (surround right) : 0.3m ~ 9m
S.L (surround left) : 0.3m ~ 9m
SW (subwoofer) : 0.3m ~ 9m
Press SETUP button.
SETUP MODE appears on the display and goes into Setup Mode.
Press FUNCTION button to select the “DIST SETUP”.
Press SURROUND MODE button to select the speaker
you want.
Each time you press this button, F.L CEN F.R S.R S.L
S.W will be selected in turn.
Press SELECT( ) button to set the speaker distance.
For F.L, CEN, F.R, S.R, S.L, S.W Speaker, you can set the distance from the
speaker to listening position between 0.3~9.0m in intervals of 0.3m.
Setting Speaker Distance
To exit setup mode
Wait for about 5 seconds or press SETUP button.
SETUP OFF appears on the display and Setup Mode is exited.
MAIN UNIT
1
2
4
3
,
Setting the Speaker Listening Distance
If the listening position is beyond the range of speaker distance setup
when you place the speaker, set the speaker distance to the maximum.
Press MENU button, and then press ENTER button.
SETUP MODE appears on the display and goes into Setup Mode.
Press button to select the “DIST SETUP”, and then
press ENTER button.
Press button to select the speaker you want.
Each time you press this button, F.L CEN F.R S.R S.L S.W
will be selected in turn.
Press …† button to set the speaker distance.
For F.L, CEN, F.R, S.R, S.L, S.W Speaker, you can set the distance from the
speaker to listening position between 0.3~9.0m in intervals of 0.3m.
1
2
3
4
REMOTE CONTROL
To exit setup mode
Wait for about 5 seconds or press MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the centre and surround speakers.
1 Press the SPK DISTANCE button to select the speaker you
want.
Each time you press this button, F.L CEN F.R S.R S.L S.W
DISTANCE OFF will be selected in turn.
2 Press …† button to set the speaker distance.
For F.L, CEN, F.R, S.R, S.L, S.W Speaker, you can set the distance from
the speaker to listening position between 0.3~9.0m in intervals of 0.3m.
3 Repeat steps 1-2 to set the mode for each speaker.
Using the SPK DISTANCE button

Related product manuals