Samsung HT-AS1 - Main Unit; Setting DRC (Dynamic Range Compression)

25
GB
24
OPERATION
• STD : Sets DRC effect to standard.
• MAX : Sets DRC effect to maximum.
• MIN : Sets DRC effect to minimum.
Setting DRC
Setting DRC
(Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
√
Press MENU button, and then press ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “DRC SETUP”, and
then press ENTER button.
• “DRC:STD” appears on the display.
Press …† button to set the DRC.
• Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN
will be selected in turn.
1
2
3
REMOTE CONTROL
To exit setup mode
• Wait for about 5 seconds or press MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Press SETUP button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press FUNCTION button to select the “DRC SETUP”.
Press SURROUND MODE button.
• “DRC : STD” appears on the display .
Press SELECT( ) button to set DRC.
• Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN
will be selected in turn.
MAIN UNIT
1
2
3
4
,
To exit setup mode
• Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and the unit Setup Mode is exited.
Press DRC button.
• Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN will be
selected in turn.
Using the DRC button