Samsung HT-AS1 - Setting Tone Control

37
GB
36
OPERATION
To exit setup mode
• Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and exits Setup Menu.
Press SETUP button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press FUNCTION button to select the “TONE CONTROL”.
Press SURROUND MODE button.
• Each time you press this button, BASS ➝ TREBLE ➝ TONE : OFF will be
selected in turn.
Press SELECT( ) button to set the tone control you
want.
• You can adjust it from -6 to +6dB by 1 step.
• The sound gets smaller at -6dB and louder at +6dB.
MAIN UNIT
1
2
4
3
,
Setting Tone Control
This function allows setting up the tone quality of the front speaker.
√
Press MENU button, and then press ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “TONE CONTROL”,
and then press ENTER button.
Press button.
• Each time you press this button, BASS ➝ TREBLE➝ TONE : OFF will be
selected in turn.
• If it is set to TONE: OFF, the Tone Control function will be disabled.
Press …† button to set the tone control you want.
• You can adjust it from -6 to +6dB by 1 step.
• The sound gets smaller at -6dB and louder at +6dB.
1
2
3
4
REMOTE CONTROL
To exit setup mode
• Wait for about 5 seconds or press MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
1 Press TONE button.
• Each time you press this button, BASS ➝ TREBLE ➝ TONE : OFF will be
selected in turn.
2 Press …† button to set the tone control you want.
• You can adjust it from -6 to +6dB by 1 step.
• The sound gets quieter at -6dB and louder at +6dB.
Using the TONE button
• Tone Control function is available only in the Stereo mode.