43
GB
42
MISCELLANENOUS
Convenient Functions
Press the SLEEP button.
•
SLEEP : OFF ➝ 15 ➝ 30 ➝45 ➝60 ➝90 ➝120 M (MIN) will be selected in turn.
You can set the time that this unit will shut itself off.
To check sleep timer
Press SLEEP button.
•
The remaining time before this unit will shut itself off is shown on the display.
•
Pressing the button again changes the sleep time from what you set previously.
To cancel sleep timer
•
Press SLEEP button until “SLEEP : OFF” appears on the display.
To output sound again
Press MUTE button again.
•
MUTE will disappear and sound will output.
Press the MUTE button.
•
MUTE appears on the display.
This function is useful when answering a doorbell or telephone call.
Sleep timer function
Mute function
REMOTE CONTROL
REMOTE CONTROL
If a product malfunction occurs, you can re-initialize the system.
Press the DIMMER button.
•
Each time you press this, the brightness changes as follows :
DARK ➝ BRIGHT.
You can adjust the brightness of the display.
Reset function
Adjust the display
REMOTE CONTROL
REMOTE CONTROL
•
SLEEP, Mute and the Adjust Display function can only be
operated with the remote control.
•
Using the RESET function will erase all stored settings.
•
Do not use this unless necessary.
Caution!
Press the MUTE button.
•
MUTE appears on the display.
Press “0” button five times and then
press ENTER button.
•
“INITIAL : YES” appears on the display.
Press …† buttons to select “YES”.
•
The unit will turn off after 5 seconds.
Turn off the power and hold the
SELECT( ) button for longer than
5 seconds.
•
POWER STANDBY indicator will flash.
1
2
3
MAIN UNIT
To Next Page
Loading...
