Samsung HT-AS1 - Setting Digital Input

23
GB
22
OPERATION
Setting Digital Input
You can set the digital input for a DVD/CD player to either OPTICAL or COAXIAL.
Press SETUP button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press FUNCTION button to select the “DIGITAL IN”.
Press SURROUND MODE button to select the CD or
DVD function.
• Each time you press this button, CD DVD will be selected in turn.
Press SELECT( ) button to set the digital input.
• Each time you press this button, COAXIAL OPTICAL will be selected
in turn.
MAIN UNIT
1
2
3
4
,
To exit setup mode
• Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and the unit Setup Mode is exited.
√
Press MENU button, and then press ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “DIGITAL IN”, and then
press ENTER button.
Press button to select the the CD or DVD function.
• Each time you press this button, CD DVD will be selected in turn.
Press …† button to set the digital input.
• Each time you press this button, COAXIAL OPTICAL will be selected
in turn.
1
2
3
4
REMOTE CONTROL
To exit setup mode
• Wait for about 5 seconds or press MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
• You can select only one digital input for each function.
Example) If you have selected COAXIAL for the CD function,
you cannot select COAXIAL for the DVD function.
Function
DVD
CD
Digital input (Default setting)
OPTICAL
COAXIAL