Samsung HT-AS1 - Setting Speaker Level

31
GB
30
OPERATION
• F.L (front left) : -10 ~ +10dB
• CEN (centre) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB
To exit setup mode
• Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and exits Setup Menu.
Press SETUP button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press FUNCTION button to select the “LEVEL SETUP”.
Press SURROUND MODE button.
• Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W
will be selected in turn.
Press SELECT( ) button to set the speaker level
you want.
• You can adjust it from -10 to +10dB by 1 step.
• The sound gets smaller at -10dB and louder at +10dB.
Setting Speaker Level
MAIN UNIT
1
2
4
3
,
Setting Speaker Level
You can set the balance and level of speakers.
√
Press MENU button, and then press ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “LEVEL SETUP”, and
then press ENTER button.
Press button to select the speaker you want.
• Each time you press button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W
will be selected in turn.
Press …† button to set the speaker level you want.
• You can adjust it from -10 to +10dB by 1 step.
• The sound gets smaller at -10dB and louder at +10dB.
1
2
3
4
REMOTE CONTROL
To exit setup mode
• Wait for about 5 seconds or press MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
1 Press SPK LEVEL button to select the speaker you want.
• Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W ➝
SPK LVL OFF will be selected in turn.
2 Press …† button to set the speaker level you want.
• You can adjust it from -10 to +10dB by 1 step.
• The sound gets quieter at -10dB and louder at +10dB.
Using the SPK LEVEL button
To set the SUBWOOFER LEVEL.
Press SUBWOOFER LEVEL button, and then press …†
button to set the subwoofer level.