SETTING THE REMOTE CONTROL
You can control certain functions of your TV with this remote control.
When operating a TV with the remote control
1. Press the TV button to set the remote to TV mode.
2. Press the POWER button to turn on the TV.
3. While holding down the POWER button, enter the code
corresponding to your brand of TV.
If there is more than one code listed for your TV inthe
table, enter one at a time to determine which code works.
Example : For a Samsung TV
While holdingdown the POWER button, usethe number
buttons to enter00, 15, 16, 17or 40.
............ ...........
@o:,,, i iiiii!!I¸¸
@@@
@@@
@@@
@
1
4. If the TV turns off, the setting iscomplete.
You can use the TV POWER, VOLUME, CHANNEL, and
Numeric buttons (0-9).
@
'_The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of W.
If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
Operation Range of the Remote Control
The remote control can be used up to approximately
23 feet (7 meters) ina straight line.
It can also be operated at a horizontal angle of up to 300 from the
remote control sensor.
16
To Next Page
Loading...
