LiSTENiNG TO RADIO
Remote Control
t. Press the TUNER button to select the FM band.
2. Tune in to the desired station.
Automatic Tuning 1 : When the 144,_1 button is
pressed, a preset broadcast station isselected.
Automatic Tuning 2 : Press and hold the A,V
button to automatically search for active
broadcasting stations.
Manual Tuning : Briefly pressthe A,V button to
increase or decrease the frequency incrementally.
Main Unit
t. Press the FUNCTION button to select the FM band.
2. Selecta broadcaststation.
Automatic Tuning 1 : Press the STOP (rl) button to select PRESET and then press the 144,_1
button to select the preset station.
Automatic Tuning 2 : Press the STOP (Jr'l) button to select MANUAL and then press and hold
the I_,_1 button to automatically search the band.
Manual Tuning : Press the STOP (rl) button to select MANUAL and then briefly press
the _ _,_lbutton to tune in to a lower or higher frequency.
Pressthe MO/ST button to listenin Mono/Stereo.
* Eachtimethebuttonispressed,thesoundswitchesbetweenSTEREOand MONO.
* Ina poorreceptionarea,selectMONOfor a clear,interference-freebroadcast.
PRESETTING STATIONS
Example: PresettingFM 89.10 in the memory
t. Press the TUNER button to select the FM band.
2. Pressthe A, V button to select89.10.
3. Pressthe TUNERMEMORYbutton.
4. Pressthe I_,_l button to selectpresetnumber.
You can select between 1 and 15 presets.
5. Press the TUNER MEMORY button again.
6. To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the I_,_1
button on the remote control to select a channel.
65
To Next Page
Loading...
